Pool Resurfacing in Culver City, CA
Aqua Creations does pool resurfacing in Culver City for backyard pools whose plaster has turned rough, chalky, or blotchy, and we replace it with an AQUA-GLASS™ fiberglass finish. Our own crews make the drive down from Ventura for every job, and nobody else is handed the work.
Average hardness on Golden State Water’s Culver City system in 2025: 203 mg/L as calcium carbonate. That is hard water, and it is what tops off your pool every week of summer.
Source: Golden State Water, Culver City 2026 Annual Water Quality Report (2025 data)Our crews leave a Ventura shop about 50 miles from Culver City
Every Culver City job starts at our shop at 1547 Los Angeles Avenue in Ventura. That is roughly 50 miles in a straight line from downtown Culver City.
The people who grind your old surface and lay up the new one are our own employees. We have never used subcontractors for AQUA-GLASS™ work, and that has held since 1991, when the company first brought this finish to Southern California. More than 7,000 projects later, the company still runs on the same idea: principle before profit.
The method is a gun-laminated fiberglass pool resurfacing system, sprayed with chopper guns over a vinyl ester barrier coat rather than rolled on by hand. Culver City is one of the towns on our Los Angeles County service area page, alongside the other towns we cover in the county.
In a customer’s words
Shirley Polzer · Review published on aquacreations.comI am very impressed with the workmanship of Aqua Creations. It is so good to know that there are still honest hardworking companies around and I am so fortunate to be found and hired by Aqua Creations.
Mild winters, dry summers, and most of the rain in four months
These are NOAA NCEI monthly normals for the Culver City station, USC00042214. The pattern explains a lot about how a pool here wears and when the work fits best.
What the weather means for a resurface
From June through September the station averages well under a quarter inch of rain a month, and highs climb from about 75 degrees in June to 79 in August. That is steady evaporation, which means steady top-offs with hard tap water.
December through March brings about 11 of the year’s 14 inches. A resurface needs an empty, dry shell, so a wet stretch can move a start date by a few days. We talk through timing for your pool at the estimate.
Culver City, Los Angeles County
Pool resurfacing across Culver City, from Fox Hills to Culver Crest
We work across the city: homes off Culver Boulevard and Washington Boulevard, the streets around Carlson Park at Braddock Drive and Motor Avenue, the blocks along Ballona Creek, and the hills of Culver Crest and Blair Hills. We also cover Fox Hills, Lindberg Park, Rancho Higuera, and Sunkist Park.
What 12-grain tap water does to a plaster pool
Golden State Water’s Culver City system delivers treated water imported from the Colorado River Aqueduct and the State Water Project. Its 2026 report puts hardness between 137 and 280 mg/L, or about 8 to 16 grains per gallon, with an average near 12.
A pool loses water to evaporation all summer, and Culver City sees almost no rain from June through September. Each top-off adds more calcium, and the minerals stay behind when the water leaves. On plaster, a cement product, that shows up as scale at the waterline and as minerals settling into a surface that has turned porous with age.
AQUA-GLASS™ is fiberglass, not cement, so the water does not etch it the way it etches plaster. Scale can still form at the waterline on any finish, so keeping the water balanced matters either way. If your plaster already feels rough or keeps staining, our pool resurfacing page covers what those signs usually mean.
When a Culver City pool is shared, the county rules come into it
A pool at a condo complex or apartment building is a public pool, and Los Angeles County Public Health publishes plan approval requirements for work on public pools. These are the parts that touch a renovation.
Plans before work
Plans for work that renovates or replaces part of a public pool need written approval before the work starts.
A white interior
The county calls for white plaster or a smooth, waterproof, white finish, and asks for samples of a shell finish it has not approved before.
Two inspections
A pre-plaster inspection comes before the final surface goes on, booked at least five days ahead, and a final inspection with written approval comes before the pool reopens.
Public pools follow the health agency’s approved finish rules, so we do not offer custom colors on hotel, apartment, or HOA pools. Source: Los Angeles County Public Health, Public Pool Plan Approval Requirements (March 2020)
Tell us about your Culver City pool
Send a few details or call the shop, and we will set up a free, no-obligation look at your pool. We will tell you plainly whether it needs a full resurface or a smaller repair, and what the drive from Ventura means for scheduling. Tell us about steps, slopes, or a narrow side yard when you call.
- Visit or mail1547 Los Angeles Ave, Suite #108, Ventura, CA 93004
- Office hoursMonday to Friday, 8 AM to 4 PM
- Emailaquaglass@aquacreations.com